Replacement Axle and Electric Brake Conversion on 2002 Karavan Boat Trailer KKRT-4100-78
Question:
I have a 2002 Karavan boat trailer model kkrt-4100-78 that has a damaged axel. Will like to replace the axel and convert to electric brake…. What parts could I use for the conversion
asked by: Edwin L
Expert Reply:
In order to replace your axle you will need to know your current axle capacity. In addition to the axle capacity you will also need to know the hub face to hub face measurement to match your current axle. Once you have this information you will be able to find a replacement, assuming one is available. Since you have square axles now and would be switching to a round axle you would also need new U-bolts.
If you cannot find an axle with the same length and capacity the other option is to use the Timbren Axle-Less Trailer Suspension System like the # ASR1THDS01 (2,200 lb) or # ASR3500S05 (3,500 lb). This system replaces your axle as well as your suspension.
In order to switch to electric brakes you will need new brake assemblies like the # AKEBRK-35-SA. You will want the brakes to match the drum size you have now. These brakes fit a 10" x 2-1/4" drum and are designed for 3,500 lb axles. You will also want a breakaway like the # 20400 and a brake controller like the # RED44FR for your vehicle.
I have attached some review videos along with links to our axles and brakes. I also attached a helpful article on adding electric drum brakes for your reference.
(click to enlarge)
Products Referenced in This Question
Hopkins Engager Trailer Breakaway Kit w/ Charger, LED Tester, Hardware, and 5 Ah Battery - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- LED Tester
- Hopkins
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- EZ Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- EZ Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability of 2200 Lb Replacement Axle With Brake Mounting Flanges and Greater Than 60 Inch Length
- Q&A: Can Brakes Be Added to the 2K Timbren Axle-Less Trailer Suspension System
- Q&A: Recommendation to Upgrade Axle and Hubs on Northern Hardware Trailer
- Q&A: Recommended Suspension for 5x8 Northern Tool Trailer
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: How to Choose Correct Replacement Trailer Idler Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Where to Position the Trailer Axle?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Hitch Receiver Sizes
- Article: RV Cell Boosters, How Do They Work?