bing tracking image
Q & A Icon

How To Pair Bluetooth Devices To The Furrion DV3300SBL RV Stereo System  

Question:

The DV3300 has a USB port on the front. Can I plug a soundbar into that port?

0

Expert Reply:

The Furrion RV Stereo # DV3300SBL can be paired to your smartphone by completing the following steps:

1. Activate Bluetooth mode on your mobile device. Then press the Bluetooth button on the front panel of DV3300S to enter pairing mode.

2. When DV3300S is detected by your mobile phone, the device name FURRION DV3300S-BL-XXXX (where X can be any character from A-Z or number from 0-9) is shown on your mobile phone.

3. Select the device name on your mobile phone, then an input box will pop up, asking you to input a password.

4. Input 0000 and confirm. Upon successful pairing and connection, 'LINK OK' will appear on the LCD of DV3300S.

As for the sound bar, you would need to physically plug the stereo into the sound bar with either the HDMI or RCA ports to get them connected to each other. The Bluetooth feature is for input only and not for output so there would be no way for it to output audio to the sound bar wirelessly.

expert reply by:
0
Kevin C
Dan L. profile picture

Dan L.

5/10/2022

The DV3300 has a USB port on the front. Can I plug a soundbar into that port?

KevinC profile picture

Kevin C.

5/10/2022

I spoke with the manufacturer, Furrion, and determined that the only audio outputs for the Furrion RV Stereo # DV3300SBL would be the HDMI port or RCA ports on the back of the stereo. Typically sound bars have RCA connections so you should be able to connect with just # DG52486PB. If your sound bar doesn't then there's most likely an adapter to go from RCA or HDMI to whichever connector type it does have.
Aiden R. profile picture

Aiden R.

5/25/2024

Thank you

Marc profile picture

Marc

7/11/2024

Furrion DV3300 paired as above when RV first powered up this spring. Then BT stopped linking to… iPhone, iPad, MacBook - it’s just not there on the list, appears to not be broadcasting its availability (pairing signal). Tried a new Samsung phone, it appeared and synced on the phone, however the Furrion still displayed NO LINK. Pressing the Furrion Bluetooth (logo) button once briefly simply changes from Bluetooth input to radio. Holding the Bluetooth (logo) button changes the equalizer profile (rock, classic, news, etc.) There MUST be some combination of buttons to hold down to get the Furrion into broadcast pairing mode, just like all other Bluetooth devices. Please help. Thanks!

KevinC profile picture
Etrailer Expert

Kevin C.

7/22/2024

@Marc Pressing the Bluetooth button should be all you need to do to get the DV3300 to show on your available devices list. Since yours isn't I recommend checking the voltage coming to it and the fuse to see if the stereo isn't getting a full 12 volts to properly operate.
Wade profile picture

Wade

8/3/2024

@KevinC if it's getting 12volts and still says no link then what?
KevinC profile picture
Etrailer Expert

Kevin C.

8/3/2024

@Wade You can try removing the fuse in the back of the unit for a few minutes to let it fully reset and try again. If it still doesn't work then it's something internal that's faulty and won't be something you can fix. You'll want to reach out to Furrion and see if they can warranty a replacement for it.

Products Referenced in This Question



Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>