Correct Tekonsha T-One Wiring Harness Needed For 2022 Nissan Pathfinder Without Factory Tow Package

Question

Question:

Hi I installed the 4 flat wiring on my 2022 Pathfinder. I plugged it into the Factory outlet as instructed nothing lights up. Do I need to add a fuse or something? Thanks

asked by: Orin L

0

Expert Reply:

You need the T-One Vehicle Wiring Harness # TK58VR that includes the additional relay harness since your 2022 Nissan Pathfinder did not come with the factory tow package installed. This harness and relay we do not carry as a separate item.

expert reply by: Bud M

0

Answer 1

Yes, it does. The Curt Hitch item #C46DR is custom fit and bolts to the 2023 Nissan Pathfinder with included hardware. I really like this hitch because the crosstube mounts behind the rear bumper cover. This not only looks better but it also helps…

view full answer...

Answer 2

We have exactly what you need as the correct trailer hitch for the 2023 Nissan Pathfinder is the Curt Trailer Hitch Receiver #C46DR.

view full answer...

Answer 3

Whether you'll need to modify the bumper fascia or not will depend on which hitch you choose. The nice thing about the Curt Class III you mentioned, part #C13126 is that the entire hitch with the exception of the receiver opening is concealed…

view full answer...

Answer 4

Yes, we do have the Curt Trailer Hitch Receiver #C46DR which is made in the USA for your 2022 Nissan Pathfinder. Do note that while the receiver is made in the USA some of the mounting hardware may be imported. The T-One Vehicle Wiring Harness…

view full answer...

Answer 5

Yes, we do have a trailer hitch for your 2022 Nissan Pathfinder. We have the Curt Trailer Hitch Receiver #C46DR. This hitch has a gross towing capacity of 6,000-lbs, and a maximum tongue weight of 900-lbs. You should consult your vehicles owner…

view full answer...

Answer 6

I would be happy to and congrats on the new SUV. To add a hitch to your 2024 Nissan Pathfinder, I recommend the Curt item #C46DR. This hitch is custom fit for your Pathfinder and bolts to it with included hardware. The crosstube mounts behind your…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Sam, yes the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C95ZV you're looking at does fit your 2023 Infiniti QX60. For a hitch, I recommend checking out the Curt Trailer Hitch Receiver #C46DR. This is a nice…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The Curt Trailer Hitch Receiver #C46DR is the custom fit trailer hitch receiver I recommend for your 2024 Nissan Pathfinder. This receiver has a hidden cross tube for a clean appearance and will bolt to your frame with the included hardware and no…

view full answer...

Answer 11

First you will need a Curt Trailer Hitch Receiver #C46DR to bolt to your frame. This will give you a 2" receiver which will accept a Ball Mount #C45534 for towing a trailer with a 2" ball coupler. For the wiring we have the 4-Way #TK58VR…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Correct Tekonsha T-One Wiring Harness Needed For 2022 Nissan Pathfinder Without Factory Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching