Question:
I bought the garnish for an older Jensen roof vent from etrailer. It is too long from the ceiling to the upper nesting of the trim. I need to cut an inch all around the garnish to get it to fit. What is the best way to trim this garnish?
asked by: Larry
Expert Reply:
If the inner lip of the garnish is too long, I would recommend marking it where it needs to be trimmed and using something like a rotary cutoff tool. Make sure you have the garnish secured so that it does not move around when trimming. The edges will be sharp after trimming the garnish so I would suggest using sandpaper to smooth the edges that have been trimmed.
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
