Does etrailer Trailer Hitch Receiver fit 2022 Audi Q5 PHEV

Question

Question:

Does this hitch require the fascia to be trimmed? Does it fit the Q5 PHEV?

asked by: Leslie

1

Helpful Expert Reply:

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e94CR is confirmed to fit your 2022 Audi Q5 PHEV. The installation of this hitch will require temporary removal of the bumper/fascia but does not require any trimming of the fascia.

I have attached the written instructions for your reference.

expert reply by: Robin H

1

Answer 1

I checked the install instructions for the etrailer hitch #e94CR that fits your 2019 Audi Q5 and it does not require any fascia trimming.

view full answer...

Answer 2

Yes it does; I verified for you the etrailer hitch does indeed fit your 2023 Audi Q5 (both the non-hybrid and plug-in hybrid), with the correct part number being the following: - etrailer Trailer Hitch Receiver #e94CR

view full answer...

Answer 3

You are correct, the etrailer hitch part #e94CR that you referenced does not require removing any rear bumper support brackets to install on your 2023 Audi Q5.

view full answer...

Answer 4

To install Thule's load-assist Hullavator kayak carrier #TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The…

view full answer...

Answer 5

It doesn't look like we have had a chance yet to install the etrailer Trailer Hitch Receiver part #e94CR on a 2020 Audi Q5 yet so I don't have any specific measurements for you. That said, based on the install photos we have of this and the…

view full answer...

Answer 6

Yes, the etrailer Trailer Hitch Receiver #e94CR will work with your 2022 Audi Q5 Plug-in hybrid. When it says that it fits the Plug-In Hybrid and excluding Plug-In Hybrid, it simply means that it fits both the Plug-In Hybrid and if you do not have…

view full answer...

Answer 7

There are indeed a couple options for a Thule roof rack for your 2023 Kia Telluride, with the difference being the crossbars and how they mount. I have added a couple photos for you showing the difference in how they look (note the photos are of the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does etrailer Trailer Hitch Receiver fit 2022 Audi Q5 PHEV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching