bing tracking image
Q & A Icon

Are Blocks Used for Installation of Draw-Tite Max-Frame Trailer Hitch Receiver on 2017 Honda Odyssey


2007 Honda Odyssey: Part # 75270 44174CQT75270 Watched the installation video for trailer hitch installation and it showed nothing about the 6 spacers that were included with the hardware. Do I use these as shown on installation sheet ? Also would have gladly paid extra for the spring tool to place the 1 spacer shown in the video. PLEASE ADVISE.


Expert Reply:

Yes, you use the blacks or "spacers" as shown in the directions for the # 75270. Check out the installation video again beginning at the 1:20 mark. You can see the block held up to the frame and they mention that the blocks will be sandwiched between the hitch and the frame. You can see one sticking out on the end, and the others a few times through the holes on the hitch in the video. Since they are covered by the hitch itself, they can be difficult to see between the frame.

I have attached the installation video and written instructions for your reference.

expert reply by:
Robin H

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>