Crossbar Recommendation for Factory Tracks Spaced 96" Apart on Lance 850 Camper

Question

Question:

I have a Lance 850 camper I am looking for a roof rack for. It came with rails that are 96 apart. I found the previous answer, and it appears the Rhino Rack RTC/RT feet will fit, but I dont see any crossbars that appear to be long enough.

asked by: Jason P

0

Expert Reply:

It sounds like you have factory tracks on your Lance 850 camper. While you are correct that those quick mount legs # RRRLT600 or the # RLTP-2 fit the tracks, we do not have any long enough crossbars to accommodate tracks that are 96" apart. the only other solution is to purchase new tracks to mount between the ones you currently have or to remove the ones you have and bring them closer together.

For the solution for purchasing all new tracks with the crossbars, I recommend the Rhino-Rack 54" crossbar system # Y02-480B or the 59" crossbar system # Y02-490B.

If you plan on removing your current tracks and moving them closer together, the crossbars/legs without the tracks are the 54" long bars # Y02-480B-NT or the 59" bars # Y02-490B-NT. The legs that come with these kits fit your tracks perfectly.

expert reply by: Bob C

0

Answer 1

On the back side of your aluminum wheels, either on one of the spokes or near the bolt pattern, there will be a weight rating for your wheel stamped somewhere. You might have to clean it really well to be able to see it, but it will be on the reverse…

view full answer...

Answer 2

Essentially it's how the two scissor steps store. The part #TLA7844 stores more like a traditional scissor step seen typically at the back of truck bed campers while the #TLA8004 stores more like what is seen on the side of campers. Since you…

view full answer...

Answer 3

For your Lance 855s Camper with standard tracks I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 #RRRLT600 and then crossbars like the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black -…

view full answer...

Answer 4

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7844 is an excellent option for your camper. It will give you 4 steps up to your bumper and have a mounting bracket height of 35-3/8". This will enable you to mount it…

view full answer...

Answer 5

From what you have described the TorkLift GlowStep Stow N' Go Scissor Steps, #TLA7844, will match your needs. This is for entry heights between 31" and 42". It will set within your door sill width with just under 2" on each side,…

view full answer...

Answer 6

Not following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will…

view full answer...

Answer 7

What I think you are asking is if the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear, #TLA7844 has a latching connection or some type of quick disconnect feature to remove from the camper. They do not have what I would call a quick…

view full answer...

Answer 8

While we do not have a video of these steps being specifically installed on your camper I took a look at the instruction manual, which is also linked, and there is a method for installing these steps on a camper that does not have a bumper. You would…

view full answer...

Answer 9

I may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7843 away from your camper to clear your bumper. It may be possible to have a…

view full answer...

Crossbar Recommendation for Factory Tracks Spaced 96" Apart on Lance 850 Camper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching