Best 5th Wheel Hitch That Works With The Lippert Turning Point Pin Box  

Congrats on all your new toys! I do not think a Curt 5th wheel hitch, like item #C16120, is the best for your set up. You would need to purchase an adapter rail item #C88KR to use this hitch with your puck system. This adds weight, cost, and…

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

If the B and W Companion hitch is the #BWRVK3600 which fits the OEM rail kit of a Ram truck it can be used with a pivoting pin box like the Turning Point but if the hitch attaches to a gooseneck hitch via a center post then it can not be used with it…

A rotating pin box like the Lippert Turning Point will relocate the pivot point between the hitch and pin box 22 inches rearward, from the point where the king pin locks into the hitch jaws to the point where the pin box turret attaches to the 5th…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

For me the Equal-i-zer Weight Distribution System #EQ37100ET is going to be the best system to choose for your 2024 Grand Design Imagine 2500RL. Equal-i-zer has continued to be the hitch everyone is trying to compare themselves to. The made in the…

Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box to give yourself enough turning clearance. With you also having a puck system…

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

The zerk fittings for the Curt A20 hitch part #C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out.…

I just have to say to start make sure the lockout bolts are not in place and there is nothing in those holes preventing the Lippert Turning Point from moving. If you do connect it to your 5th wheel hitch with the wedge to try and break it free from…

This is a great question and one that we actually get quite often. Basically the Curt A20 5th Wheel Hitch #C16034 is the upgraded version of the Q20 #C16530-16017 and it's the one I specifically recommend. The upgrades in question focus mostly on…

Sidewinder pin boxes offer more benefits than just short bed turning clearance so I would definitely recommend utilizing yours by allowing it to pivot. You'll find that it's a lot easier to back up with the Sidewinder and the trailer tracks a…