bing tracking image
Q & A Icon

Replacement Wiring Harness For a Adams Drift Boat Trailer

Question:

I have an adams drift boat trailer and I want to replace the entire wiring harness without doing any splices. The harness itself is a four prong flat type in the front and ends in a standard three prong plug for the 6.5x2 oval recessed submersible tail light. Drift boat trailers have short frames. Can you help me?

0

Expert Reply:

The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB would be the closest harness we carry for your Adams drift boat trailer. This will require you to splice the 3-Wire Pigtail # A45PB for your Optronics Fleet LED Trailer Tail Lights # TLL12RK as we do not carry a harness that has the connectors you need already spliced into the harness. I recommend using the Deka Heat Shrink Butt Connector # DW05744-5 to make the connections. You will need 2 of these 5 packs to get the 6 connectors you need.

If you do not feel capable of making the splices you can have it done at your nearest service center. You also may need to have the harness ran as the connectors may not fit through the frame when connected.

expert reply by:
0
Gregory M

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>