Is There A TPMS Sensor That Can Connect To The GM Trailer Package TPMS Sensor System  

The only trailer tire sensors that will work with the factory TPMS on your 2021 GMC Sierra 3500HD Denali is the GM kit 85110397 that is sold through GM. These sensors will need to replace the valve stems on your trailer wheels. I recommend staying…

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

I looked up your 2023 Cedar Creek 377BH and since it has a tapered nose and your 2024 Chevy Silverado 2500HD has a "longer" short bed you could easily get away with a fixed hitch and have enough turning clearance. The GVWR is a little over…

Yes; you are looking for the iN-Command TPMS for RVs, Trailers, and Vehicles - Bluetooth - 4 Waterproof Tire Sensors #NCTP100, which is compatible with Chevy's smart trailer integration. It's a really great feature that Chevy has been working…

From the center of the shank to each end of the base (forward and back) of the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500 is 18 inches. This means that if you only have 9.5 inches of clearance from your shank to the tool box you would not…

A trailer as old as yours would be pretty hard to determine an overall capacity for, but since you have 6 lug hubs that would indicate by todays standards you have a capacity most likely between 5,200 and 6k which matches pretty close to the spindle…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

So the install of a spindle like the #TRU97FR really needs to be done by a welder who has done the job before and has the special jigs for the job. It's a precision job and we can't recommend a method for it aside from taking it to someone…

I do have an option for you but the GM TPMS uses a proprietary software, you cannot use another sensor with the program even if they operate on the same frequency per TST. I do know of many others who have run into issues with GM not offering a…

We do have a potential option for you, however the GM TPMS system you have will not work with any of our systems since they are a closed system, meaning they operate off of their own system. With that being said, I recommend taking a look at the:…

Yep! The iN-Command RV Tire Pressure Monitoring System #NCTP100 was designed to be compatible with the iN-Command setup you have on the center console of your 2020 Chevy Silverado 2500 so it will be visible on your truck's display.

We do include battery hold-downs and hold-down bolts. They are sold separately and I've linked our selection of all of them. You'll need to choose the correct size for your truck. For example, the Deka Safety Grip Battery Hold-Down #DW06160…