TorkLift Camper Tie Downs For A 2022 Ford F-150 4X4 With A 6-1/2' Bed

Question

Question:

Looking for some for my F 150 Ford, 2022, FX4 with a heavy duty payload factory package, 6 1/2’ bed, super crew, with a factory hitch.

asked by: John

0

Expert Reply:

For your 2022 Ford F-150, you'll need the:

-TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2018 for the front, and # TLF3007 for the rear.

Additonally, you're also need a set of turnbuckles like the TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs # TLS9050A

expert reply by: Bryce D

0

Answer 1

You are correct. The difference between part #TLF2014 and part #TLF2014A is the constructions. The #TLF2014 is constructed of powder-coated steel and includes the hardware. Part #TLF2014A is made of aircraft-grade aluminum and has a powder-coated…

view full answer...

Answer 2

Basically you will need to drill into the side plates of Curt hitch #C15810 to install TorkLift custom rear camper tie downs #TLR3500 on your 2002 Ford F-350. I have included a link to the installation instructions for the tie downs for you. I have…

view full answer...

Answer 3

All of the TorkLift tie downs for the 2007 Toyota Tundra do require at least a 4 inch by 4 inch side plate on the vehicle's hitch to bolt the tie downs to. If the hitch on your vehicle does not have a 4x4 side plate, you do have to install a new…

view full answer...

Answer 4

For your 2021 Ford F-150 Crew Cab Short Bed the Torklift Camper Tie Downs you'd want are the part #TLF2018 and #TLF3007.

view full answer...

Answer 5

The weight is pretty similar between the aluminum Torklift camper tie downs part #TLF2022A and the steel part #TLF2022 which is 4 lbs heavier at 39 lbs vs 43 lbs.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

view full answer...

Answer 10

Hi Thomas, Appreciate that info, and we do have the right TorkLift camper tie-downs for your 2023 Ford F-350 with an 8 foot bed and the factory hitch. The correct tie-downs for your truck are the following: - TorkLift Tie Downs - Custom Frame Mount -…

view full answer...

Answer 11

Hey Tim, Good questions, and camper tie-downs are always a touch confusing so I can explain the difference for you between the two TorkLift camper tie-downs for your 2016 Ford F-250 long bed with factory hitch and no running boards. The difference…

view full answer...

Answer 12

I would be happy to! We have quite a few options for TRUE Frame Mounted Torklift camper tie downs for a 2015 Ford F-250. I have listed our entire selection below because there are several different ones depending on what model and accessories your…

view full answer...

TorkLift Camper Tie Downs For A 2022 Ford F-150 4X4 With A 6-1/2' Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching