Replacement Rollers For Wobble Rollers To Eliminate Marks and Gauging In The Boat Hull
Question:
Hello, I am wanting to take away these wobble rollers and add some bunks under the hull. Will these double slotted bunk brackets be ok in the section I have identified where I want to make them? Boat weighs about 5100 empty plus fuel and gear. Rear wobble rollers will still be in place for awhile supporting the rear of the boat. Just tired of the current wobble rollers up front leaving marks and gauging fiberglass. Thanks!
asked by: Dave J
Expert Reply:
Since your main concern is the marks on the hull of your boat I recommend going to the Yates TPR Ribbed Wobble Roller. These rollers are constructed of thermal-plasticized rubber which is a non-marking, non-scratching material. It is stronger and more durable than traditional rubber while being softer and more pliant than polyurethane. You will need to find your shaft size to find the correct 5" Rollers. If you have a different size roller let me know what size it is and I can help you find the correct rollers.
5/8" Shaft # YR500YW-5P
3/4" Shaft # YR500YW-6P
7/8" Shaft # YR500YW-7P
1" Shaft # YR500YW-8P
1-1/8" Shaft # YR500YW-9P
1-1/4" Shaft # YA72FR
If you rather go to the Bunk Boards # CE27845 you will need to determine the correct height for the CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies.
9-1/4" Tall Bracket # CE10190GA-4
10-1/4" Tall Bracket # CE10191GA-4
12-1/4" Tall Bracket # CE10192GA-4
16-1/4" Tall Bracket # CE10196G-4
The CE Smith U-Bolts # CE15283GA-8 are needed to attach the brackets to a 3" tall crossmember.
Products Referenced in This Question
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 9-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 2 Inch Tall
- 8-3/4 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 10-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 2 Inch Tall
- 9-3/4 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 12-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 11-3/4 Inch Tall
- 2 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 16-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 15 Inch Tall
- 2 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 8
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 84 Inch Long
- CE Smith
more information >
Yates Ribbed Wobble Roller for Load Rite Boat Trailers - TPR - 5" Diameter - 1-1/4" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 1-1/4 Inch Shaft
- Yates Rubber
more information >
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 3/4" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 3/4 Inch Shaft
- Yates Rubber
more information >
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 7/8" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 7/8 Inch Shaft
- Yates Rubber
more information >
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 1 Inch Shaft
- Yates Rubber
more information >
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 1-1/8 Inch Shaft
- Yates Rubber
more information >
Product Page this Question was Asked From
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 5/8" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Continue Researching
- Search Results: bunk boards boat trailer parts
- Search Results: boat trailer winch trailer winch
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 12"
- Search Results: bunks
- Shop: CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Shop: CE Smith Bunk Style Guide-Ons for Pontoon Boat Trailers - 24" Long - 1 Pair
- Shop: CE Smith Carpeted Johnboat Bunk Board for Boat Trailers - 2' Long - Qty 1
- Shop: CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 16-1/4" - Qty 4
- Search Results: ce11416
- Video: Let’s Check Out the Comfort Ride Transom Saver
- Video: Ultimate Overview of the CE Smith Y-Style Bow Stop for Boat Trailers
- Video: Comprehensive Review: Buyers Products Trailer Hand Winch
- Search Results: boat trailer winch mount
- Search Results: bow stop bracket
- Search Results: bow stop
- Video: Complete Breakdown of the CE Smith Heavy Duty, Vertical Bunk Brackets
- Video: Complete Breakdown of the CE Smith Keel Roller Assembly for 3" Wide Trailer Tongues
- Video: Comprehensive Review: CE Smith Wobble Roller Retainer Ring
- Video: All About the Yates Ribbed Wobble Roller for Load Rite Boat Trailers
- Q&A: Why Does a Marker or Clearance Light Only Have One Wire
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Q&A: Will Adding Leaf Springs with More Leaves Raise the Trailer
- Q&A: Boat Trailer Wobble Roller with 4-1/4 Inch Diameter, 3 Inch Width that Fits a 3/4 Inch Shaft
- Q&A: Recommended Replacement Boat Trailer Roller with Wobble Function
- Q&A: Difference Between Rocker-Rollers and Wobble Rollers for Boat Trailer
- Q&A: Replacement 4-3/8 by 3 Inch Wobble Rollers for a Boat Trailer
- Q&A: Can a Ribbed Wobble Roller be Used in Place of a Regular Wobble Roller on a Boat Trailer