Hitch Extender with at Least 5" of Clearance for 2" ATV Hitch Receiver

Question:

Hi, my ATV has a bit longer tube in that the pin to go through locking a hitch in place is back about 5 inch from the opening on the mouth of the receiver. This one shows 4inch from mouth to pin, do you have one like this but 5 inch or 6 inch instead?

asked by: Jennifer B

Helpful Expert Reply:

Thank you for the photo!

Pretty much all of our extenders have 4" or less for that clearance you're looking for except for the 18" Long Draw-Tite Hitch Extender for 2" Hitch Receivers # HE18. This is a bit longer than the 8" extension piece you were looking at but this is the only option that meets the specs you're needing.

If you'd like to add an anti-rattle and locking hitch pin I recommend checking out the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 which has both features integrated into 1 product. You can use this to secure the extender to your ATV hitch or at the other end to secure your accessory to the extender. You could also add one to each end of the extender to make everything more secure if you'd rather do that.

Attached are some videos for you to check out.

expert reply by: Jon G