Replacement 3,500 lb Trailer Axle With 95 Inch Hub Face to Hub Face Measurement
Question:
Hello. Im looking for a replacment axle for a enclosed trailer It is a rock solid brand v nose 7x14 Needs to be : 4 in 3500 lb 2 3/8 round tube needs to be arched just axle no brakes or hubs Electric wires in axle for brakes spring center is 78 inches hub face is 95 inches Thank you
asked by: Alex B
0
Expert Reply:
We do have a 3,500 lb trailer axle with a 95 inch hub face to hub face measurement, though you'll need to weld on new spring centers because 95 inch axles have 80 inch hub spring center measurements. So for the axle, without any hubs or brakes, you can use either of the following, along with the spring seats:
- Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs # 7685269
- Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs # 7359765
- Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter # TRSS238
expert reply by: Kyle S
0
Products Referenced in This Question
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Leaf Spring Suspension
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snow Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch
- 95 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement 3 Inch Diameter Axle Beam with 95 Inch Hub Face Dimension
- Can a Lippert Axle be Replaced with a Dexter Axle?
- Identifying Dexter Axle Marked P-11 With 70 Inch Spring Center Measurement
- Is the Dexter 7359765-EB A Drop Spindle Axle
- Should I Replace The Spindle Or The Axle On My 2009 Fleetwood Pioneer 23FQ Travel Trailer
- Where is Drop Measured on Trailer Axle
- What Info is Needed to Pick Out Replacement Axle for Trailer
- Adding Lift to 3,500 lb Trailer Axle
- Is 76" Spring-Center Measurement Abnormal for 95" Wide Trailer Axle
- Replacement for Lippert 3500 Lb Axle
- Replacement Axle Needed for 4" Drop AL-KO 3,500 lb Axle
- Recommended Drop Axle for Trailer With 80 Inch Spring Center
- How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Does Drop Spindle Add Clearance?
- Can Leaf Springs be Moved to Top of Underslung Axle
- Replacement for a Marine Master Boat Trailer Axle
- Replacement Drop Axle for Old Horse Trailer with 6 on 5-1/2 Inch Bolt Pattern
- Comparing Amount of Drop of Torflec Axle with a Drop Axle
- How to Mount Leaf Springs to Top of New Boat Trailer Axle
- Is it Okay to Use Two Axles of Different Capacities on a Tandem Axle Trailer
- Can I Change Out Longer Hangars and Short Equalizers for Longer Ones to Gain Fender Clearance
- Recommended Leaf Springs and Leaf Spring Hangers for Dexter 3,500 Lb Drop Axle
- How To Lower a Trailer 3 Inches
- Will Axle Flex Under Load
- Should The Drop Spindle On a Leaf Sprung Trailer Axle Be Angled Toward The Rear Of a Trailer?
- Is the Castle Nut and Lock Washer Included with the Dexter Axle Part # 7685269