Question:
I have a old trailer. The hub is aluminum with built in grease fitting and has the number 58000 on it. 1 spindle front and rear. ID of the seal is about 1.45 and the spindle is about 3.75 long. Can you help?
asked by: Jeremy W
Expert Reply:
You are going to need to replace your spindle with the BTR E-Z Lube Spindle # TRU44FR as your spindle that fits the 58000 hub is shorter than current spindles. This new spindle will place the grease fitting on the end of the spindle allowing you to grease the bearings through the spindle.
We have a few hubs for you to choose from based on your wheels and tires.
5 On 4-1/2" Idler Hub For 13"-15" Wheels # AKIHUB-545-2-LFEZ-2K
5 On 4-1/2" Idler Hub For 10"-12" Wheels # AKIHUB-545-2-EZ-2K
4 On 4" Idler Hub For 8"-14" Wheels # AKIHUB-440-2-EZ-2K
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
