Base Plate Kit Adapter Solution for 2014 Jeep Wrangler with AEV Bumper  

You can definitely use the Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin #BX88357. The 1/16" space you were talking about is not too much play, it is such a small amount it won't be impactful. Drilling the holes out is not…

We don't have a confirmed fitting baseplate for a Smittybilt XRC bumper, but since it has a D-Ring mounts you could reach out to Smittybilt and see if this bumper is rated for towing from the D-Rings. If so then you would just need to measure the…

Since you have a Blue Ox tow bar currently and a 2018 Jeep Wrangler JL you could use the D-ring adapter part #BX88358 to attach to your D-rings. I'd recommend running the safety chains to the frame of the vehicle as that's the most secure…

If your Jeep has an aftermarket bumper installed with 15/16" holes (0.9375). The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin, #BX88357, is identified with a nominal hole diameter of 7/8". It specifically states minimum of…

You'll first want to verify with the manufacturer that the bumper is rated for flat towing before actually using the D-Rings for this purpose. Since D-Ring adapters are only compatible with motorhome-mounted tow bars and would not work with your…

There are a couple choices for you that will be based on the bumper you have. Blue Ox Aftermarket Bumper Adapter #BX88358 -Bumper tab thickness: 3/4", 7/8", and 1" -Pin Hole diameter: 1" Blue Ox Aftermarket Bumper Adapter #BX88357…

The only solution would be to use the Blue Ox base plate kit adapter for Off-Road Bumpers with 1 inch D-rings part #BX88358 with the bumper you go with as long as it has D-rings and then you can use the Blue Ox tow bar you have now.

To connect your Blue Ox tow bar, such as their Alpha #BX7380, to your Wrangler Unlimited's towing bumper's 1-inch D-rings you will want adapter kit #BX88358. This includes the 7/8-inch pins and retaining clips. You can see how this installs…

The Smittybilt XRC Gen2 bumper on the 2020 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part #RM-035 to tow with the D-rings on your bumper. Smittybilt is…

Thanks for reaching out and for all of the information given! You definitely have a situation in which you'll be going against what a bike rack manufacturer says so just know that while I can give you some advice, "technically" it…

We don't have the exact bracket replacements you are looking for, however, we do have the Bolt-On Skid Wheel for TorkLift SuperTruss Hitch Extension #TLA7100 that uses all of these same parts and simply has the additional wheel on the bottom to…

It looks like you have the Original model TorkLift SuperHitch item #TLC1208 on your 2011 GMC Sierra 2500. When used with the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 32" Long item #TLE1532 this hitch has a…