Pre-Greased Trailer Hub & Drum That Fits Lippert 3,500 lb Axle
Question:
Hello. Im looking for a greased hub for a 2021 Aluma 8115 trailer. Its a 3500# Lippert axle. Would like to have as a spare. Thanks
asked by: Earny
0
Expert Reply:
We have exactly what you need for a pre-greased hub and drum for your Lippert 3,500 lb axle. The correct part number is the following:
- Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K
I did verify for you with Lippert that the # AKHD-545-35-EZ-K is the correct fit for their 3,500 lb axles.
expert reply by: Kyle S
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Replacement Hub for AxleTek Hub # BD2-545-17
- Replacement Brake Drums and Brake Assembly Parts for Lance 1685 Travel Trailer
- How to Determine Trailer Axle Capacity to Find Parts to Add Brakes to Trailer
- Recommended 5 on 4-1/2 Hub for 3,500 lbs Axles w/ L68149 Inner Bearing and L44649 Outer Bearing
- Replacement Bearings/Seals for Haulmark Model TH85X20WT2 Tandem Axle Enclosed Cargo Trailer
- Adding Trailer Brakes to Trailer with 3,500 lb Trailer Axle
- Upgrading Trailer with 3,000 lb Axles to Self-Adjusting Brake Assemblies
- Replacement Brake Assemblies for BD2-545-17
- Pre-Greased Hub/Drum for 3500 lb Spindles on 2018 R Pod 178 and Four Winns D0210S02 Trailer
- Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Recommended Hitch for 2011 Nissan Juke for Towing 2,000 Pound Trailer With Brakes
- Parts Needed to Add Electric Brakes to a Trailer
- How To Find Correct Replacement Bearings and Hub for Skeeter FXR20 Boat Trailer
- Picking Out Replacement Hub for 1996 Elite Ski Boat Trailer
- Replacing Lippert 3,500 Pound Axle with 76 Inch Spring Seat Length
- Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Inner Grease Seal Placement On Trailer Electric Brakes
- Determining Which Replacement Parts Fit Lippert 8000lb Axle
- Determining the Correct Replacement Brake Drums and Hubs for 1967 Forester Camper
- Do Trailer Hub Seals Get Damaged When Pulling Hub Off to Inspect Brake Assemblies
- How To Find Correct Replacement Bearings and Hub for Magic Tilt Chaparral
- Best Way to Pack Trailer Bearings with EZ Lube Spindles
- Can EZ-Lube Hub and Drums be Used on Non-EZ-Lube Spindles
- How to Determine What Replacement Hub and Drum Assembly with a 5 on 4-1/2 Bolt Pattern
- Can a Hub/Drum Be Installed on Axle Without Electric Brake Assembly
- How to Select Replacement Hub/Drums for EZ-Loader Trailer
- Will Changing From Idler Hub to Hub/Drum Change Wheel Offset