Curt Trailer Wiring for 2019 Lexus RX350 Tow Package

Question

Question:

How do I know if my 2019 Lexus RX350 AWD has Towing prep package? I did find the wiring cable cape under real driver side. does that mean my vehicle has the Towing prep package?

asked by: James

0

Expert Reply:

Yes, since you were able to find the trailer wiring connector under the rear of your 2019 Lexus RX 350 that would indicate that it has the factory tow package and that the trailer wiring kits like the Curt part # 56083 would be the correct solution to add trailer wiring.

expert reply by: Jameson C

0

Answer 1

Hey Shane, for your 2020 Lexus RX 350 that didn't have a factory hitch the trailer wiring that you honestly should have gone with is the part #C56217 which is for the versions of the vehicle that don't have the tow package. While your vehicle…

view full answer...

Answer 2

The only hitch that will work with your 2020 Lexus RX350 F Sport is the Draw-Tite Trailer Hitch item #75540. This hitch is custom fit and bolts to your Lexus with included hardware. This is a class III hitch with a 2" receiver. It has a 4,500…

view full answer...

Answer 3

For your 2022 Lexus RX 350 the Curt T-Connector Vehicle Wiring Harness #56083 will connect to the factory tow package with no other parts required. This will give you a 4-way flat trailer connector on your Lexus. Currently the T-One Vehicle Wiring…

view full answer...

Answer 4

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #56083 requires your 2021 Lexus RX 350 to have the factory tow package which includes a factory installed module to power the trailer lights. Since your harness does not have power I…

view full answer...

Answer 5

I went ahead and did some investigating and it turns out that the reason your Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #56083 is not working is due to the fact that you do not have the factory towing package. Instead,…

view full answer...

Answer 6

We sure do! The Curt Class III hitch, part #C73DR is a confirmed fit for the 2021 Lexus RX 350. For a trailer wiring harness, use #C56217. For a ball mount, you'll need #C45010 with pin and clip #PC3, and for a trailer ball use #19260 for a 1-7/8…

view full answer...

Answer 7

It is supposed to be in the area you are pointing to where the tray is removed. Since yours isn't there I would assume it's buried a little further under other tray/interior panels and you would need to dig a little further and see if maybe…

view full answer...

Answer 8

In order to add a trailer wiring harness to your 2020 Lexus RX 350L you'll want to use the Curt #C56217.

view full answer...

Answer 9

The Kuat NV 2.0 Base 2-Bike Platform Rack - 2" Hitches - Tilting - Matte Black #BA22B is not rated for use on the back of a motorhome or trailer. The movement on the back of a travel trailer is the most significant but the 5th wheel or motorhome…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Curt Trailer Wiring for 2019 Lexus RX350 Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching