Question:
I have a 2015 Forrest River Surveyor model 264RKS, Two 3500lb axles, brakes on both. I want to repack the bearings. I need four grease seals for the repack and I want a spare bearing kit to keep while traveling. What part numbers do I need? Thanks.
asked by: David E
Expert Reply:
For your 2015 Forest River Surveyor 264RKS with tow 3,500lb axles you will need the Grease Seals # RG06-050. These are sold as a 2-pack for one axle so you will need 2 sets for your tandem axles. The Seal Puller # PTW1219 will help you to remove the old seals without risking damage to the bearings or races on your hub/drums. We do have replacement Tang Washers # 5-101 and Nut Retainers # 6-190 available if yours cannot be reused. Both of these will work with your Super Lube axle spindle but you will need to verify which retainer you may need.
For a spare set of parts the Bearing Kit # BK2-100 will contain both inner and outer races along with inner and outer bearings, a grease seal, tang washer and cotter pin. You will want to keep the 7-Piece Installation Set # PTW83020 with this kit so that you will be able to correctly install the new races without damaging them.
Cotter Pin - 1/8" Thick x 1-3/4" Long
Replacement Spindle Washer - Tang Type for E-Z Lube
Replacement Nut Retainer for 6-191 Jam Nut
7-Piece Installation Set for Bearings, Races, and Seals
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle