Is The #84 E-Z Lube Spindle # TRU87FR  

The #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles #TRU77FR is, as the name says, for a 3,500 lb axle, and we can get all the parts you are looking for. You did not mention what bolt pattern you needed, so I'll give options for…

The #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles - 4" Drop part #TRU87FR is designed for a 3,500 lb axle with a 2-3/8" outer diameter. I don't have a list of every trailer that the spindle will fit but so long as…

The brake mounting bolt pattern for the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles #TRU87FR is 2-13/16" and then the section that fits into the axle tube is 2" and it tapers out to 2-3/8". Attached are dimensional…

The #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles #TRU87FR is designed to fit 3,500lb axles that are 2-3/8" outside diameter. The narrower portion of the spindle is roughly 2" to fit inside the axle tube and will angle out…

It appears that the #84 E-Z Lube Spindle #TRU87FR is the correct spindle for your axle. You can confirm that this is the correct part by verifying the measurements of the spindle and brake flange. The landing for the grease seal is 1.719, the inner…

To find the correct spindle for your United XLV trailer you'll want to check the number stamped into the bearings. For example, the #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter #TRU24FR is compatible with with #L68149 inner bearing…

I believe you meant a TDE 46245, is that correct? If that's the case, you've got a 3500 lb axle which uses a 10 inch hub/rotor with a 5 on 4-1/2 wheel bolt pattern. You'll want to use the Kodiak #KHR10D hub/rotor as a replacement. The hub…

Your spindle is an obsolete size and will need to be replaced. We have a couple options such as our Replacement Weld On Straight Spindle #TRU77FR or the 4" Drop Spindle #TRU87FR both of which are designed to weld onto a 2-3/8" outside…

An EZ lube spindle will be better because it allows you to insert grease from inside the spindle where the bearings are and push out the old grease whereas with a Bearing Buddy you basically just get to push grease through the front of the hub. I…

The EZ Lube Spindle, #TRU37FR will fit the Dexter Trailer Hub Assembly - 5200 & 6000 lbs - 6 on 5-1/2 - EZ Lube, #8-201-9UC3-EZ. The trailer hub assembly is a 6 on 5-1/2 inch bolt pattern and is rated at 3,000 lbs. per assembly, but because the…

It looks like you cut the spindle off but left the brake mounting flange on your trailer. I would recommend you cut off the entire spindle and have a qualified trailer fabricator weld on the EZ Lube Spindle #TRU74FR as long as your brake assemblies…

The #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles Item #TRU77FR does not come with a castle nut so you'd need to order that as well with part #165686.