Awning Recommendation For A Forest River RPod 171

Question

Question:

We have a Rpod 171 camper it does not have an awning. Looking for options for an awning for it. What products do you have available that would work for it? Thanks

asked by: Joann P

0

Expert Reply:

For your Forest River RPod 171, I recommend using the:

-Thule HideAway Awning # TH490011.

This awning will bolt directly to the side of your sidewall on your trailer, and measures 9'10" long and is 8' wide.

expert reply by: Bryce D

0

Answer 1

The Curt Echo Trailer Brake Controller #C51180 won't itself provide any charge to your trailer mounted battery, but you certainly can still have a 12V power wire ran from the 7-Way to the battery for this purpose with the Echo in place. The Echo…

view full answer...

Answer 2

Yes the Thule HideAway Awning - Wall Mount #TH490011 can be installed on the sidewall of your 2021 R-Pod 171 that you mentioned. It would attach to the wall of the camper with included hardware.

view full answer...

Answer 3

The correct Thule Hideaway awning for attaching to the side of a camper like your R-Pod 172 would be the part #TH490018 as this is the direct mount version that you'd use for the side of a camper like yours. There isn't anything you'd…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 11

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Answer 12

Hey Jon, yes to be able to tow a trailer with brakes all you'll need is the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation #ETBC7L and the brake controller, the Tekonsha Prodigy RF Wireless Brake Controller #TK94FR that you're…

view full answer...

Awning Recommendation For A Forest River RPod 171

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching