bing tracking image
Q & A Icon

Replacement Bearing Kit Recommendation for 3,500 lb Dexter Axle

Question:

Hello! Use a Dexter Axle. Only number I can find is on the seal. The # is : 00-610-010. Dexter says they never heard of this number. This is used on a 3500lb axle,serial # 152659043. I wish to replace the bearings,races,and seals on both sides.

1

Helpful Expert Reply:

The standard 3,500 lb axle uses the Hub Bearing Kit # BK2-100 which is for a #84 spindle. If your axle is a 1990 or newer then you likely need these parts but if it's older then I'll need you to measure your spindle to make sure we can get you the parts that fit correctly. Attached is a photo showing where you'll need to measure the spindle and here are the dimensions for the bearing kit I referenced above in case you want to double check on your end:

Inner Bearing - # L68149 (1.378" ID)
Outer Bearing - # L44649 (1.063" ID)
Grease Seal - # 58846 (1.719" ID and 2.565" OD)

Attached is an installation video of this bearing kit for you to check out.

Where to Measure for Replacement Bearings and Seal
Where to Measure for Replacement Bearings and Seal
(click to enlarge)
helpful expert reply by:
1
Jon G

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>