Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
Question:
I have a Truryde rvd h 545 , sz 120616….. what is best to replace this?
asked by: James S
1
Helpful Expert Reply:
For your application you need the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles # AKHD-545-35-EZ-K to replace the Tru-Ryde RVD-H-545 trailer hub/drum assembly.
This is designed for the industry standard #84 spindle so it uses inner bearing L68149, outer bearing L44649, and a grease seal with a 1.719" ID and 2.565" OD. You can check these specs against what you have if you want to double check on your end.
Attached is a review video for you to check out.
Tru-Ryde RVD-H-545 Hub and Drum
(click to enlarge)
(click to enlarge)
helpful expert reply by: Jon G
1
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Is a Damaged Spindle Safe to Use If Hub Fits It
- How to Check for a Bent Trailer Axle Spindle
- What is the Best Grease for Trailer Bearings
- How To Connect A Dometic 310 RV Toilet To A Supply Line That's Too Far Away
- Best Upgrade for Dometic 310 Part-Timer RV Toilet
- How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Dexter 12" X 2" Electric Trailer Brakes With Parking Brake Ability
- Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles