Correct Curt Trailer Hitch Receiver for a 2023 Cadillac XT4

Question

Question:

I just traded my 2019 Cadillac XT4 for a 2023 Cadillac XT4. Will the Curt hitch work for my 2023 XT4?

asked by: Kerry D

1

Helpful Expert Reply:

The Curt Trailer Hitch Receiver part # C39FR which is a fit for a 2019 Cadillac XT4 is also a fit for a 2023 Cadillac XT4. I have attached an install video I did on this if you would like to check it out below.

expert reply by: Conner L

1

Answer 1

The Curt Trailer Hitch Receiver #C11025 is a confirmed fit for your 2012 Kia Optima. Installation of an aftermarket trailer hitch or any other part will not void the warranty as consumers are protected by the Magnuson-Moss warranty act that states,…

view full answer...

Answer 2

Yes, you will be able to reinstall the bumper cover for an OEM look on your 2021 Cadillac XT4 after installing the Curt Trailer Hitch Receiver #C39FR. I have attached an installation video for you to see the finished product. If you don't already…

view full answer...

Answer 3

I did some looking around, but I was unable to find anything we carry to accomplish a quick release of this panel. That being said, this does not mean there is nothing available. We do have an alternate option, however. A hitch cover like the…

view full answer...

Answer 4

Yes, we do have a hitch for your 2013 Cadillac SRX. It is the etrailer Trailer Hitch item #e55AR. This hitch is custom fit and bolts to your Cadillac with included hardware. I really like this hitch because it installs right below your rear bumper…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Hey Kin, yes the Draw-Tite Max-Frame #DT28GR will fit your 2023 Toyota Corolla Cross XLE. This hitch has a 2,000 lb weight capacity, a 300 lb tongue weight capacity, and will work great with the Kuat Transfer V2 #KU84FR.

view full answer...

Correct Curt Trailer Hitch Receiver for a 2023 Cadillac XT4

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching