Bearing Buddy For A Straight Spindle With An Outer Bearing # LM67048
Question:
Hi. I’m looking for the correct bearing buddy size for my trailer. It’s a straight spindle with LM67048 bearings.
asked by: Ricky M
0
Expert Reply:
When doing some research with the Outer Bearing # LM67048 you provided, the flange diameter of your hub should be 2.44 inches. The Bearing Buddy Bearing Protectors # BB2441SS fits with a 2.441 inch hub bore. The bearing buddy is constructed of stainless steel. It maintains slight, controlled pressure (3 psi) with spring-loaded piston, which prevents water from entering the hub.
This bearing buddy works with the Outer Bearing # LM67048 that your provided. I attached a review video link below.
expert reply by: Noah E
0
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.441 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Trailer Hub Bearing Kit for 2019 Flagstaff Super Lite 26RLSW Dexter 3722505 Axle 4k
- Grease Seal and Bearings Recommendation for 5200 lb Lippert Axle
- Replacement Bearings for Dexter 3000 lb Trailer Axle
- Replacement Bearings And Seals For A 2019 Grand Design 2970RL With Dexter 4.4K Axles
- Bearing Replacements for L68149 and LM67048
- Replacement Hubs for Old Trailer That Uses Inner and Outer Bearing LM67048
- Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Bearing Replacements for Trailer with L44610 L44619 L68111 L68149 442251
- Availability of Replacement Wheel Bearing Races Compatible w/ LM67048 Wheel Bearings
- Which Bearings, Races, and Seal Fit Dexter Hubs 8-283
- Replacement Bearings and Seals Based On Printed Number On Face Of Bearing
- Trailer Hub that Uses Bearing # LM67048 for Inner and Outer
- How to Pick Out Replacement Bearings for 2007 Suntracker
- Bearing Kit with LM67048 and L44649 Bearings
- Replacement Bearings and Seals for Dexter 3,000 lb Torflex Axle
- Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- What Spindle is Needed for LM67048 Inner and LM11949 Outer Bearings
- How to Pick Out Trailer Bearings for a 1986 Boat Trailer
- Replacement Bearing, Seals, and Races for ShoreLandr Boat Trailer
- Can Two Different Hubs that Use the Different Bearings Be Used on Same Trailer Axle
- Replacement Grease Seal for 4400-lb Lippert Trailer Axle
- Replacement Outer Bearing and How to Determine the Correct Inner Bearing Seal
- Determining The Correct Replacement Bearings And Grease Seal For Lippert 5200lb Axle
- How to Pick Out Bearings for Harbor Freight Trailer
- New Spindles, Hubs, Tires, and Wheels for a Canoga Concrete Mixer/Trailer
- Selecting Replacement Bearings for Boat Trailer with Lippert Axle
- Trailer Bearing Available with Inner Diameter of 1.25 inches
- Replacement hub Parts for 3,000 lb Dexter Axle With Bearings LM67048 and L44649
- Bearing Kit Required for 1996 EasyLoader Trailer
- Do Brake Pads on Both Sides of a Trailer Axle with Disc Brakes Need to Be Replaced at the Same Time