Replacement Nut Retainer For etrailer Trailer Hub and Drum Assembly # AKHD-865-7-1-K
Question:
does the nut lock come with the loaded drum assembly?
asked by: Jim R
0
Expert Reply:
We do offer a few nut locks for your spindle as one is not included with the Trailer Hub and Drum Assembly # AKHD-865-7-1-K. Depending on your spindle we have the Nut Retainer # 6-190, Spindle Washer # 5-101 or Cotter Pin # 165649 for your spindle.
expert reply by: Gregory M
0
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Leaf Spring Suspension
- Cotter Pin
- ABS Fasteners
more information >
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Replacement Nut Retainer for 6-191 Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut Retainer
- 1 Inch I.D.
- Redline
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- etrailer Hub and Drum Assemblies For 7,000LB Axle With 1/2" Wheel Studs
- Manufacturer of Trailer Hub and Drum For 7K Axles AKHD-865-7-1-K
- 7k Trailer Axle Hub/Drum for Hub with 10-36 Seal and 14125A Bearing
- How to Pick Out Replacement Hub for Trailer that Sheared Off Studs
- How To Use 17.5" Wheels On a 7,000 Lb Trailer Axle
- Recommended Hub and Drum Assemblies and Brakes for 7,000 Pound Triple Axle Trailer
- Swapping to Larger 9/16 Wheel Studs On a 2017 Dutchmen Voltage 4005 5TH Wheel Toy Hauler
- Will 7K Trailer Hub and Drum Assembly - 8 on 6-1/2 AKHD-865-7-1-K Work with Dually Wheels
- Is Hub Replacement Required for 15 Inch Wheels to be Upgraded to 16 Inch Wheels?
- Trailer Hub for 7k Trailer Axle on Cam Dump Trailer
- Replacement Hub and Brake Assemblies for Dexter 8-219 Wheel Hubs
- Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Studs for 7,000 Pound Axles
- Recommended Hub/Drum Assemblies With 8 Lugs For Spindle Measurements
- Comparing etrailer 7K Trailer Hub and Drum Assemblies with 8 on 6-1/2 Bolt Pattern
- Recommended Brake Assemblies And Drum Assemblies For 7,000 lb Dexter Axles
- Replacement Hubs for 7,000 Pound Axle With 15123 Outer and 25580 Inner Bearings