Replacement Safety Cable Needed for Roadmaster Nighthawk Tow Bar

Question

Question:

Dear Sirs: I have a Roadmaster Nighthawk tow bar that has a damaged safety cable. Roadmaster customer service says that I need part # 910676 to replace it. Do have this part? Thanks

asked by: Mark L

1

Helpful Expert Reply:

To replace the 8K Hybrid safety cables that came with your Roadmaster Nighthawk tow bar you'll need the kit # RM-674 which comes with 2 of these cables.

These are the same design as your current setup and they come with a limited lifetime warranty.

Attached is a review video for you to check out.

expert reply by: Jon G

1

Answer 1

Great question Betty! The 2020 Chevy Colorado can be flat towed with all 4 wheels on the ground as long as the truck has a neutral and four wheel drive low setting. Before flat towing, apply the parking brake, start the engine, shift the transfer…

view full answer...

Answer 2

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 3

Hey Rex, thanks for reaching out! Choosing flat towing parts can be confusing because of all the information and products out there, but here are my top picks for your 2019 Chevy Colorado: - etrailer Invisible Base Plate Kit #e98966 - etrailer SD…

view full answer...

Answer 4

Hey Ray, thanks for the photo and explanation! Lippert has a variety of replacement parts that look like they might work, but when I reached out to my contact to verify what would be the correct piece they said you have an older system and the parts…

view full answer...

Answer 5

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 6

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

view full answer...

Answer 7

Hi Francis; after a lot of checking with our manufacturers I found out there is not a base plate/tow bar that will work with your Bronco Everglades edition with the winch.

view full answer...

Answer 8

I would be happy to help you set up your 2021 Chevrolet Spark for flat towing. First and foremost your Spark can not be flat towed if it has an automatic transmission. If you do have a manual transmission, here are the parts you will need to flat…

view full answer...

Answer 9

I would be happy to! To flat tow your 2021 Chevy Tahoe Premiere you will need the following parts: Tow Bar and Safety Chains - Roadmaster Sterling Tow Bar item #RM-576 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item…

view full answer...

Answer 10

Currently Lippert only offers the Replacement Motor with Box Brackets #LC369473 for your Kwikee 42 Series Steps #LC372779. In the event your steps were made in 1999 or earlier you will need to use the Motor Upgrade Kit #LC380266 to have the updated…

view full answer...

Replacement Safety Cable Needed for Roadmaster Nighthawk Tow Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching