Question:
Our new camper has power jacks front and rear. Will these work with the newer power jacks?
asked by: Rick
Expert Reply:
The MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs # MR82AR is only going to fit scissor jacks so if your powered jacks are a different style you would need to switch to a different cross brace like the Valterra Folding Manual Stabilizer for Trailers and RVs # 020106.
The # MR82AR requires that your jacks are perpendicular with the frame of your trailer and that the bolts for the footplate and mounting plate of the jack are 3/8" in diameter. As for them being powered, as long as you release the tension on the cross brace before raising/lowering your jacks you won't have an issue.
I've attached a video below where Shane will go over the requirements of these cross braces and show you how to install them.
Valterra Folding Manual Stabilizer for Trailers and RVs - 14" to 28" Tall - Aluminum
MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs
