Options for Sway Control Tab for Ball Mount for Attaching Hitch Ball

Question:

I do not know if I need the weight distribution bars. If I purchase the C17051 and decide I do not need the weight distribution bars can they be removed? I would then use the adjustable hitch with the sway bar, I already have. At this point I just don’t know what I need and want flexibility to use both the weight distribution and the sway bar or or just the sway bar.

asked by: Shawn

Expert Reply:

Sounds like you are looking for the mount for the small ball of your friction sway control unit. You have a couple options like the part # D320 which is a ball mount that has the mounting tab attached to the side of the ball mount platform. We have the # 3442 which allows you to weld a tab onto your current ball mount, or we have the # RP26003 which fits between the ball mount platform and the hitch ball.

expert reply by: Jameson C

Shawn

10/20/2022

Jameson C.

10/20/2022

Yes you can use the # C17051 without the spring bars connected and it would give you an adjustable ball mount like you are wanting. This would give you the flexibility you are wanting.