Question:
Hello, Im rebuilding the breaks on a boat trailer and looking to replace Tie Down Engineering Hubs part TDE 46233-1. Can you tell me the replacement hub? Thanks!
asked by: Kyle C
Expert Reply:
When it comes to finding the correct replacement hub for your trailer axle, we first would need to know what the current inner and outer bearing number is on your axle. There should be a stamped number on both the inner and the outer bearing. If you cannot find the numbers stamped or etched on the bearing you will need The Digital Caliper # PTW80157 and measure the trailer spindle in the places noted, then measure the inside diameter of the hub on your trailer.
After you find the bearing numbers please reach back out to me and I can get you the correct replacement hubs.
4" Carbon Fiber Digital Caliper
Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
