Parts Needed To Install Old Square Thule Crossbars on RetraxPRO Tonneau Cover  

For the Thule square roof rack bars on your vehicle the Thule awning #TH490010 is a great option. You will also need adapter #TH490001. In either case you will likely need to push the Rola basket as far as it can go to one side of the roof rack so…

Yes, the Roof Rack Adapters for Thule HideAway Awnings #TH490001 that you referenced is compatible with Thule Aeroblade crossbars like what you have. It could fit around the bars or could attach directly via the top channels as well.

The correct fit kit to use with the Thule Feet part #TH460R and your current Evo Square bars like part #TH712500 is actually the part #THKIT3101 for your Leer camper shell roof rack tracks.

I have a solution for you but there is no way to attach the Thule HideAway Awning for ProMaster item #TH64WJ to the side of your Promaster 3500. Instead you will need to use the Roof Rack Adapters for Thule HideAway Awnings item #TH490001 to attach…

The uprights or foot packs you need for your Tracker ll are part #TH460R. This kit comes with 4 of the foot packs. To mount the foot packs to the tracks you will also need part #THKIT3101. This is the fit kit for Podium style foot packs and includes…

It sounds like you may be looking for the Thule Fit kit for Podium Feet in channels part #THKIT3101. The fit kit includes pads, bolts, plates and channel nuts for adapting the Podium legs for use with tracks.

For a Thule HideAway Roll Out Awning designed for fitting an aftermarket roof rack like what you have on your 2018 Ram ProMaster 2500 the part number you want is #TH490010 and then for the roof rack adapter part #TH490001. With these two part numbers…

I was able to pull up a photo of the Gamiviti Multi-brackets for a 4Runner and it does look like they would work to allow you to mount a Thule Hideaway Awning #TH490010; you will need to measure the mounting holes on the bracket to verify that M8…

From what I could find online it looks like the Thule HideAway Awning #TH490010 is compatible with the AEV roof rack on your 2017 Jeep JK Wrangler Rubicon, you just need to use the Adapter Kit #TH490001 to mount it on your roof rack. The adapter kit…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…