Does Curt Pintle Hook Fit on B and W Pintle Hook Mounting Plate  

The left to right mounting holes on Convert-A-Ball Pintle Hook Combo, #PH1, are 3.375 inches apart, center to center. Top to bottom they are 1-3/4 inches apart center to center. From the bottom of the bottom mounting hole to the bottom most part of…

The Buyers Products 30 Ton Pintle Hook part #337PH30 is designed for a lunette ring that has a 2-3/8" to 3" inner diameter with 1-3/8" to 1-5/8" diameter section such as the Buyers Products Heavy-Duty Forged 4-Bolt Mount Lunette…

The standard size for Lunette rings is 3 inch like what you have. While I am not totally certain what hook you have it's likely you did buy the correct size. Due to the looser connections of Pintle/Lunette setups some noise is to be expected.…

The Curt #C48231 pintle hook will indeed work with a 3 x 1-5/8 lunette ring like #337BDB1394. At the narrowest part, the inside width is 1-3/4 inches, which widens out to 2 inches, as shown in the provided photo.

The Curt Pintle Hook with 2" Hitch Ball - Bolt On - 10,000 lbs/16,000 lbs #C48190 is not made in the USA but are made to US specs and requirements. Curt trailer hitch receivers are made in the USA, but not all of their products are domestically…

If you have a 2 inch receiver opening on the vehicle you will be towing with the B&W Pintle Hook Mounting Plate, part #BWPMHD14005 may work well for you. The mounting plate features 7 holes on each side of the plate that are spaced 1-3/4 inches…

It sounds like you're trying to determine compatibility of a lunette ring with the Curt Pintle Hook part #C48205. If that's the case, what you need to do is measure the inner diameter of the ring. This pintle hook works with an inner ring…

The Replacement Pintle Sleeve for Convert-A-Ball Pintle Hook Combos Item #PS goes around the ball shaft on certain Convert-A-Ball pintle hook combo mounts such as #PH1. I have included a couple of pictures illustrating this for you.

The Curt Pintle Hook, #C48190, has has mounting hole dimensions of 1-3/4-inch apart vertically and 3-5/16-inch apart horizontally. It installs to pintle hook mounting plates such as, #C48324. I have included video reviews of each product for you.

The best option I have for an adjustable pintle hook that slides into a 2" hitch is the Curt Pintle Hook Mounting Plate part #C48341 with the Curt Pintle Hook part #C48210. I am not aware of any way to use a swivel type pintle hook with a…

While I'm not able to verify if the B&W Pintle Hook Mounting Plate #BWPMHD14005 can fit without bumper or spare tire interference in the rise position on your 2018 Jeep Wrangler Unlimited (we just haven't had a chance to test this), I did…

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.