How to See Backup and Side Cameras with Furrion Vision S Camera System

Question:

I recently purchase a 2023 Pinnacle 38FLGS with the three-camera system 7inch display and security mode switch in the camper. First off I just dont believe the only way this switched to the side cameras when turn signaling is displaying the three cameras through the system. There has to be a mode where I can look at just the rear camera all the time and then switch to the side camera when using that blinker. Next issue no matter what I am doing i.e. in gear or not when I put my foot on the break it switches to the last side camera that came on. When you hit the break it should go to the rear camera and not the last side camera when hitting the break. The dealer was no help here. Got anything for me?

asked by: Carl B

Expert Reply:

The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FR98NR will need to be in the tri-view mode to see the backup and side cameras while towing. My contact at Furrion confirmed that and confirmed none of the cameras should be activating when you press the brake pedal unless they don't have power and the brake light circuit is sending power to them.

You'll need to use the tri-view mode to see all 3 cameras and then when you want bigger/better visuals on one of them you'll have to switch to it manually with the monitor, according to the manufacturer.

I know this isn't the news you wanted to hear, but this is how the Furrion Vision S was designed to work.

expert reply by: Jon G