bing tracking image
Q & A Icon

How To Find Correct Replacement Bearings and Hub for Floe Snowmobile Trailer


I need replacement hubs for 97 floe 2 place trailer with oil bath hubs


Expert Reply:

I have a few options for you to help with identifying the bearings on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the bearings based off industry standards. For example, a 3,500 lb axle uses L68149 and L44649 bearings like what comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100 or the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles part # AKHD-545-35-EZ-K. The other option would be to take the hubs off the trailer and either read the part numbers off the old bearings or measure them with a dial caliper to the nearest thousandth of an inch. I have attached an article that goes over this process in more detail.

I have also attached a few links with lists of our bearing and hub selection. The oil bath filter can be selected to further narrow down the selection or you can switch to grease which would likely be easier and more cost effective.

expert reply by:
Conner L

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>