What Are the Dimensions of the 30 Amp SmartPlug RV Power Inlet and Connector

Question

Question:

Can you please post a dimensional picture in the pictures of the part?

asked by: Gregory P

0

Expert Reply:

Yes, the dimensions of the 30 Amp SmartPlug RV Power Inlet and Connector, found in Gray # SM87FR or White # SM77FR is as follows:

Receptacle - 3.25" wide x 4.5" tall x 3.75" long (or deep)
Plug - 3" wide x 3" tall x 4" long (or deep)

Attached is a review video as well as some dimensional photos for you to check out!

expert reply by: Jon G

0

30 Amp SmartPlug RV Power Connector Dimensions
(click to enlarge)

30 Amp SmartPlug RV Power Inlet Dimensions
(click to enlarge)

Answer 1

I sure can; I have added a photo for you with the dimensions of the mounting hole for the 50 amp SmartPlug inlet and connector. This comes in your choice of three different colors, and the dimensions are the same for each: - Black: SmartPlug RV Power…

view full answer...

Answer 2

The SmartPlug Upgrade RV Power Inlet and Connector, 30 Amp, #SM77FR is a great option. I prefer the stainless steel, #SM67FR option myself for aesthetics but each is well made and the same unit outside of materials constructed with. You use the same…

view full answer...

Answer 3

The only storage bag we currently carry that will fit the Mighty Cord RV Power Cord #A10-5036EDBK is going to be the Bulldog Winch Camo Mesh Duffle Storage Bag #BDW20388. We also offer the MORryde Manual Storage Reel #MR47RR, which you could mount in…

view full answer...

Answer 4

Since the SmartPlug RV Power Inlet and Connector - 30 Amp #SM77FR is 3" wide, you could use the 3" hole saw like what's in the kit #PT34VR and then use a sanding tool to sand the hole until you get a snug fit. You'll just want to…

view full answer...

Answer 5

Yes, the conical cordseal and install tool is indeed included with the SmartPlug RV Power Inlet and Connector - 30 Amp - White #SM77FR.

view full answer...

Answer 6

The female end, or the power inlet, with the weather resistant cover is 3.25 inches at its widest point. 4.5 inches tall and 3.75 inches long. The male side of the plug is 4 inches long 3 inches wide and 3 inches tall. Here are the two different…

view full answer...

Answer 7

The 1" Long Black Torx Wall Liner Screw #WLS100 is the best option for the plywood installation. These screws are fine thread and made for metal studs. They have a tapping edge but often a starter or pilot hole should be drilled. You can then…

view full answer...

Answer 8

Hi Robert, The amount of panels you can have is going to depend on their output and the maximum input capacity of the solar controller. For example, the Go Power MPPT Solar Charge Controller #GP54FR you were looking at has a maximum input of 1040W @…

view full answer...

Answer 9

To attach your 2018 Mercedes-Benz Sprinter 2500's factory 7-way to the Draw-Tite Max-Frame Trailer Hitch Receiver item #75549 you will want to use the Mounting Bracket for 7-Way item #18138. To attach it to the Curt Trailer Hitch item #C13388 you…

view full answer...

Answer 10

I called Lippert and they informed me of the grease seal dimensions for your 3,500 lb axle. The correct replacement grease seal for you is part #168255TB.

view full answer...

Answer 11

The connector for the SmartPlug RV Power Inlet and Connector #SM87FR is designed to work with three 10AWG wires along with their casing. The port is designed for 10AWG wire as well but can handle 8AWG.

view full answer...

Answer 12

Hey Richard, to pick out a replacement gas shock I'd need to know the compressed and extended length you need as well as the weight of the door. For example, the part #372-5300-20 has 20 lb of force and has an extended length of 20 inches and a…

view full answer...

What Are the Dimensions of the 30 Amp SmartPlug RV Power Inlet and Connector

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching