How To Use the Thule Hullavator Pro Kayak Carrier On a 2020 GMC Sierra 3500 Crew Cab  

The Thule WingBar Evo crossbars do not require you to cut the rubber inside the channel at all; the rubber simply separates when you push into the channel so you don't have to worry about that. You can install the Thule Hullavator #TH898 by using…

For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give…

I think your best option would be to get a TracRac CapRac Ladder Rack for Camper Shell/Truck Cap #TH29200XT for a roof rack system that will install on your camper shell. Then for an assisted kayak carrier the Thule Hullavator part #TH898 would be…

Yes, the Rhino Rack Vortex roof rack part numbers #RRVA150B-2, #RRRLKVA, and #DK427 that fits your 2022 Ford F-150 Supercrew is compatible with the Thule Hullavator part #TH898. The 59 inch bar length works with the Hullavator as well as the bar…

The Thule Hullavator Pro #TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will…

You will actually just use the square nuts that come with the Thule Hullavator Pro #TH898 to mount it on your Yakima JetStream bars (see attached photo). I have attached the installation instructions for you to reference for the installation as…

The Thule Hullavator Pro Kayak Carrier part #TH898 will not require any adapters in order to mount on the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack part #Y01151-59. In order to secure the Thule Hullavator to the Yakima OverHaul HD Crossbars…

Yes, the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs TH897XT (NLA) can fit on both square-bars, as well as on the Yakima CoreBars, like the Yakima CoreBar Crossbar - Steel - Black - 70" Long #8880655. Attached are a couple…

Each of the Thule Hullavator Pro Kayak Carrier part #TH898 requires 28.5" of load bar space to mount which means you would indeed be able to fit two on the 78" Yakima OverHaul HD Adjustable Truck Bed Ladder Rack part #Y01151-59.

If your factory crossbars extend 4 to 8 inches past the roof rack foot that attaches the crossbars to the roof, the Thule #TH898 Hullavator Pro kayak carrier will work for you. If the crossbars do not extend past the roof rack feet by that amount,…

You may be able to fit two Thule Hullavators #TH898 on the roof of your 2021 Mazda CX-5, but it will require at least 57" of crossbar space along with a decent weight capacity since each Hullavator weighs 40lbs empty. I do not see raised roof…

The Yakima HD Crossbars #Y01156 will work with the Thule Hullavator #TH898. Based on the pictures you sent in it looks like you have the crossbars installed upside down. The end caps have an opening on the other side that lets you easily slide in…