Recommended Trailer Hitcher 4-Pole Wiring For A 2023 Hyundai Palisade

Expert Reply:

Currently there is only the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with Installation Kit # 119190KIT available for your 2023 Hyundai Palisade. This kit will require some splicing to install so you'll need some crimpers # PT43ZR to strip the wire casing and crimp together wires with some heat shrink butt connectors # DW05744-10.

The wiring is as follows:

White: Ground to the chassis
Yellow: Splice to left turn/brake signal wire
Green: Splice to right turn/brake signal wire
Brown: Splice to running light wire
Red: Splice to your brake/stop light wire
Black: Ring terminal this wire to the positive post on your battery with an inline fuse holder

Once the installation is complete you can insert the fuse into the inline fuse holder and can loop the dust cap on the 4-pole connector though the tow loops on your Curt Trailer Hitch Receiver # C13427 to prevent it from dragging on the ground.

expert reply by: Kevin C

0