Replacement Foot Pad For Power Gear Hydraulic Leveling Jack  

Since the diameter of the replacement foot pad part #LC359344 that you referenced is 10-1/2 inches the correct SnapPad would be the #SP84FR4.

The replacement Foot Plate for Lippert Power Gear Hydraulic Jack #LC359344 that you mentioned is the correct replacement foot pad for your 501096 jacks and is larger than what you have at 10-1/2 inches but we do not have anything that is 12 inch…

It looks like based on the photo you attached that the Replacement Foot Plate for Lippert Components (LCI) Power Gear Hydraulic Jack part #LC359344 would be the correct replacement foot pad for your Lippert Power Gear Hydraulic Jacks.

Hey Larry, so we literally just sold our last one within past month and it's no longer available to us as a replacement part. It does look like Lippert/Kwikee does still offer it for warranty claims as odd as that sounds so I would try checking…

Yes, we do have a replacement foot for the Lippert Replacement Atlas Jack #LC359278 that you referenced as part #LC359344.

The bolt does not come with the Replacement Foot Plate for Lippert Power Gear Hydraulic Jack #LC359344. I checked with Lippert, and while there isn't an OEM replacement bolt, they did say that the correct bolt was a Grade 8 3/4"-16 x 1-1/2…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…