Question:
I would like to tee off our existing furnace to be able to fuel an Olympic Wave 6 heater to supplement heat in our 2022 Micro Minnie travel trailer. The 3/8inch line coming into the furnace is the easiest to access and in a location next to where I would like to mount the catalytic heater. Would this work?
asked by: Darin
Helpful Expert Reply:
To verify if you will be able to run both your propane furnaces on your 2022 Micro Minnie travel trailer you will need to identify the BTU usage for all your propane appliances. Then verify you have enough flow from your regulator to power your appliances you are going to run. Once you know you have enough flow you will need a Tee # MBS97FR along with a Short Hose # MBS34FR to run back to your furnace and a longer hose like the 6' # MBS74FR to run to your Olympic Wave 6 # CAM57341. All these hoses and tee use a 3/8" flare fitting.
Camco Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs
MB Sturgis Propane Hose - 3/8" Female Flare Swivel x 3/8" Female Flare Swivel - 2'
MB Sturgis Propane Hose - 3/8" Female Flare Swivel x 3/8" Female Flare Swivel - 6'
MB Sturgis Propane Adapter Fitting - 3/8" Male Flare Tee Fitting - 45 Degree - Qty 1
MB Sturgis Propane Adapter Fitting - 3/8" Male Flare Tee Fitting - 45 Degree - Qty 1
