Best Way to Pack Trailer Bearings with EZ Lube Spindles
Question:
What is the correct way to relube an ezlube axle I had them all replaced along with the brakes 2 years ago. I havent used the trailer a lot but am heading off on a 6000 mile trip.
asked by: Ray
0
Expert Reply:
Greasing by hand is what we recommend instead of using the EZ lube fitting to pump in grease. Unfortunately its' too easy to overfill hubs with grease using the EZ lube fittings which then blows out the seal. LMX Red grease like the part # L11390 is a really great option that's heavy duty and waterproof. I attached a vid on packing hub bearings for you to check out as well.
expert reply by: Jameson C
0
Products Referenced in This Question
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Industrial Strength Grease
- Brake and Bearing Grease
- Petroleum-Based
- LMX Red Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- How To Connect A Dometic 310 RV Toilet To A Supply Line That's Too Far Away
- Best Upgrade for Dometic 310 Part-Timer RV Toilet
- How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Dexter 12" X 2" Electric Trailer Brakes With Parking Brake Ability