Recommended Stabilizer Jacks for a Mercedes Benz Sprinter 3500 RV Van Conversion  

Question:

Expert Reply:

I have a couple universal options you can consider to stabilize your Mercedes Benz Sprinter 3500 as there is not a custom fit option. The MORryde Hitch Mounted Stabilizer # MR22AR is a great option if you have a 2" receiver on you Sprinter. This will fit into your receiver so there is no need to drill into your frame. As it is also as far back on your Sprinter as you can go it will give you great stabilization from front to rear.

We also have the 24" Ultra-Fab Ultra Scissor Jacks # UF48-979002 you would be able to secure to your frame rails. They include a manual crank handle or you can get a Drill Adapter # UF48-979005 if you prefer to use a cordless drill to raise and lower the stabilizers. If you select these you will likely need to drill holes in your frame as they are designed as a universal fit with several different mounting hole options. It is best to place the jacks at a 45 degree angle to the frame to help reduce both side to side and front to rear body roll.

expert reply by: Bud M

0