Can the EZ-Jack be Used on a Triple Axle Trailer

Question

Question:

Hi, How do you recommend jacking up a triple axle trailer? Is there a EZ-Jack type system for this?

asked by: Howard G

0

Expert Reply:

I spoke with my contact at EZ-Jack and he says that to use the EZ-Jack on a triple axle trailer you will need to turn the curve up, opposite the wheel, and drive up on the jack and you will be able to change the tires.

Other wise a floor jack and jack stands are the safest way to service trailer axles.

expert reply by: Robert G

0

Answer 1

The Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers #EZ-JACK is not rated for use on triple axle trailers. We do not currently carry a drive-on wheel jack for triple axle trailers so you would instead need to use a standard bottle jack like…

view full answer...

Answer 2

Yes, the Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers, #EZ-JACK will work wonderfully for the boat trailer you describe.

view full answer...

Answer 3

The Andersen Rapid Jack #AM3620 is not designed to work with triple axle trailers. If you are looking to use it for leveling, then I recommend the Andersen Camper Wheel Chock and Leveler #AM3604 for your application. The similar #EZ-JACK is also not…

view full answer...

Answer 4

Hello Mark, thanks for reaching out. The TRED GT Camper Leveler Blocks #RR84AP are rated for 5,000 KG which is about 11,000 lbs. So these will be a great upgrade from wood blocks, so long as they are appropriately rated for your RV. When using…

view full answer...

Answer 5

That's a great question. The manufacturer doesn't exactly provide this information so I went out to our warehouse and did some tests with the Blaylock EZ Jack and Wheel Chock part #EZ-JACK for you. It looks like the highest point on the…

view full answer...

Answer 6

The Blaylock EZ Jack and Wheel Chock #EZ-JACK has a lift height of 6 inches. The other axle's wheel is designed to come off the ground, but since it is hanging from the suspension, it will not come off the ground a full 6 inches. I have attached…

view full answer...

Answer 7

Hi Michael; the Escape 17B uses a Dexter Torflex axle but you will have to identify which one. This can be found on the axle tag. Once you have identified the axle you can choose from the following: -Torflex Lift Kit #K71-723-01 (#9 Torflex with…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hi Bob; the BTBRV Tongue Weight Scale #BTBRV44FR comes with a limited lifetime warranty.

view full answer...

Answer 10

Hi James; the BTBRV Tongue Weight Scale #BTBRV44FR uses a 323 gauge so the margin of error is 3%. The gauge on the scale displays weight in 50-lb increments up to 2,000 lbs.

view full answer...

Can the EZ-Jack be Used on a Triple Axle Trailer

Product Page this Question was Asked From

Continue Researching