Replacement Hub and Spindle for Dexter 69-46 Axle
Question:
Hello, Im looking for a hub assembly and a weld on spindle for a torsion axle. The part numbers are Dexter 69-46, and on the hun is 8-259235. The hub is 5 on 4.5. Any help would much appreciated.
asked by: Matt W
0
Expert Reply:
The Dexter 69-46 axle has a straight spindle with # L44649 bearings. For a replacement spindle you can use the BTR E-Z Lube Spindle for 2,000-lb Trailer Axles # TRU44FR. Then for an idler hub, the Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-EZ-2K would be a great replacement. If you're looking for a hub and drum assembly then the # AKHD-545-2-EZ-2K is what you need instead.
expert reply by: Robin H
0
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement Parts Needed To Convert Wheel Style Trailer Hub With Idler Hub On Homemade Boat Trailer
- Compatible Hub for TRU44FR BTR Spindle
- Availability of Straight Spindle with 2,000 lb Capacity
- Availability of Trailer Spindle With Bearing Surfaces that Measure 1-1/16 inch Diameter
- Replacement 2,000lb Trailer Axle Spindles And Hubs For Short Spindles.
- Which Grease Seal for Trailstar Boat Trailer
- Correct 4 Lug Hub for EZ Lube Spindle 1.25 RD STUB
- Spindle Recommendation for Hub that Uses Inner and Outer Bearing L44649
- Choosing The Correct Hub And Spindle For Your 2,000 Lb Axle
- How Do Trailer Spindles Typically Install on Trailer Axle
- Difference Between BTR and BT8 Spindles
- Parts for a Custom 2K Axle with 58 Inch Spring Centers and 62-1/2 Inch Hub Face Measurements
- Choosing Proper Set Angle for Replacement Dexter Torsion Axle.
- Dexter Spindle Washer For 1998 Kiefer Trailer
- Is there Any Way to Determine the Trailer Bearing Measurements without Pulling the Hub
- Replacement Spindle for Trailer Axle with Hub Part # 8-258
- How to Determine Replacement Hubs for a Trailer Based on Spindle Dimensions
- Hub, Mounting Flange and Brake Assembly Recommendation for BTR EZ Lube Spindle TRU44FR
- Replacement 1-1/16 Inch Straight Spindle Recommendation
- Recommendation for Failing EZ Lube Spindle and Vortex Hub
- Solution for Finding Hub to Fit Shorter Spindle with Outer Diameter of 1.06 inches
- Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Replacement Hub For BTR E-Z Lube Straight Spindle
- Bearing Kit for Redline 1-1/4 Inch Diameter Spindle
- Replacement Spindle and Hub For 3/4 Straight Spindle