Will the Yakima RidegBack Bike Rack Clear The Spare Tire on My 2021 Jeep Wrangler?  

The distance from the center of the rear pin hole to the back of the shank of the part #RM-071-1075 is 1.8 inches.

I have a few different e-bike racks for you to check out and the differences really just boil down to the weight of the rack and the features it comes with. The first recommendation I have is the Hollywood Racks Destination E Bike Rack #HLY66ZR which…

The answer to your question is yes, there is absolutely going to be a bike rack that can clear the large spare tire, though it will be very helpful if your Jeep Wrangler has a trailer hitch with a longer receiver such as the Draw-Tite Trailer Hitch…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

While 10 inches of clearance from the top of a hitch tube down to the ground isn't a lot by any means it's also not an unheard of amount of ground clearance. There are several vehicles that have similar clearances without issue. That said, we…

Yes, we do have hidden trailer hitches that fit your 2023 Toyota RAV4 Prime like with the etrailer hitch part #e23ZR which is mostly hidden since only hitch opening hangs below rear bumper or for a totally hidden hitch we have the Draw Tite part…

The Hitch Adapter 1-1/4 inch to 2 inch Trailer Hitch, item #80303, has a longer shank on it so that it can not be installed in a lower capacity Class I hitch. Class I hitches have a stop inside the receiver to keep higher capacity Class II…

Excellent choices! Both bike racks will hold up and perform really well so when it comes down to it I would have to say that the Yakima RidgeBack #Y02457 would be the best for ease of use since the anti-rattle and locking knob are built into each…

To tow a trailer with your 2024 Kia Telluride you'll need a trailer hitch, wiring, and a ball mount. Here are the parts I recommend for doing so: - etrailer Trailer Hitch Receiver #e45ZR - Wiring #C59236 for Standard Telluride OR #C93FV for LX…