How Much Does Blue Ox Adjustable Ball Mount BLU25XR Weigh?  

I have another option for you but No, you cannot replace the 2-5/16" ball on the Blue Ox #BLU25XR with a 2" hitch ball. Instead I recommend going with the Gen-Y #325-GH-924 which has a similar rise/drop at 6" either way, and includes a…

The trailer hitch I recommend for a 2017 Ford F-350 is the Draw-Tite Trailer Hitch Receiver part #DT45508 which is a fit for all models whether you are replacing a factory hitch or just adding one yourself. It has a class v rating with 2-1/2"…

Sure will! 2-1/2" shank ball mounts like the Curt Ball Mount #C79NR you mentioned are made to a standard size allowing them to be installed in all trailer hitches that are 2-1/2". You'll have zero issues using it in the Draw-Tite…

In regards to the Draw-Tite Trailer Hitch Receiver part #DT45508, the distance from the inside of each side plate is 37-1/2" per Draw-Tite. I can't say for sure what the largest spare tire size that can be used is but you can use this info…

The Draw-Tite Trailer Hitch #DT45508 for your 2016 Ford F-350 weighs in at 90lbs with all of the hardware.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…