Do JT's Strong Arm Jack Stabilizer Kit Release For Landing Gear Pads Need to be on Side  

Can you send me a picture of the feet of your jacks? How far apart are they?

The other end of the JT's Strongarm part #LC191023 has a wider lug spacing to allow the #LC191023 to install into. You are trying to install the kit on the end that is narrower.

Yes, we do have weight distribution system options which come equipped with a solid, one-piece 2-1/2" shank. There are not many options but of them, I recommend the Equal-i-zer Weight Distribution System part #EQ64FR which is for trailers from…

Trailer manufacturers list the loaded tongue weight for a trailer as being 10% of the loaded weight of the trailer, which is why you see 1,050 lbs for a GVWR of 10,500 lbs for your trailer. In reality you can make the tongue weight whatever you want…

In regards to the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers part #LC191025, the arms have to be installed in front of the front jack and behind the rear jacks per the instructions. The full copy of the installation instructions are…

Yes, the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug #LC314592 that you referenced does come with the screws if you wanted to screw them onto the plate.

You can get the breakers at any home center or electrical supply house. They are an off-the-shelf item and aren't specific for this purpose. According to Progressive Dynamics, the following breakers are suitable replacements: -ITE/Siemens—QP,QT…

A vacuum breaker like the Replacement Check Valve/Vacuum Breaker for Factory RV Tank Flushing Systems - 1/2" MPT #A10-3050 is used on a toilet flush valve to prevent water from being siphoned backward into the drinking water system. It…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The Head Unit and R16 Roller Adapter #C16515 is more of an entry level fifth wheel head designed for a lower price point, whereas the A16 part #C16520 is a bit nicer with it's 2 piece jaw system that will provide better king pin contact which…