Brake Mounting Flange Bolt Pattern for 3.5K 95" Long Dexter Trailer Axle
Question:
What is the brake backing plate 4 bolt pattern measurements? Thanks
asked by: Mark R
0
Expert Reply:
The brake mounting flange on the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles # 7685269 has mounting holes that are 2-7/8" apart on center (see attached).
expert reply by:
Jon G
0
Brake Mounting Flange Bolt Pattern
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- EZ Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can The Timbren Silent Ride Suspension TSR3500S05 Be Used With Torsion Axles?
- Q&A: Solution to Replace a 3 Inch Round Axle w/ a 91 Inch Hub Face
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Brakes, Hub/Drums, Bearings, And Seals For A Lippert 3,500lb Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Is 76" Spring-Center Measurement Abnormal for 95" Wide Trailer Axle
- Q&A: Recommended 95" 3,500LB Drop Axle For a Tandem Axle Trailer Build
- Q&A: Recommended Parts For Suspension Building Car Hauler Suspension With Tandem 3,500LB Axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle