Slam Latch Option  

Hello Robert, For a compartment door lock with a 3-1/2" x 3-1/2" hole, what you need is the Global Link RV Baggage Door Slam Latch #295-000015. Your door needs to be at least 1-1/4" thick as well, and this will require the Global Link…

You can change your cam locks to slam latch locks but it will take modifying your hatch doors. You can use the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black - 1-1/2" Thick #295-000015 along with the Global Link Mounting…

You can change your cam locks to slam latch locks but it will take modifying your hatch doors. You can use the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black - 1-1/2" Thick #295-000015 along with the Global Link Mounting…

The lock cores on the Global Link RV Baggage Door Slam Latch #295-000015 does use a cam lock. To be keyed alike you do need to replace its lock cylinder along with the lock cylinders in your other Global Link locks with the correct length cylinder…

Without a key number it is going to be impossible to find replacement keys for the other doors. DB isn't a designation that identifies the lock brand or the corresponding key. Since you have a Southco for one and what sounds like a different…

If your lock is made by Bauer then you will want the the Replacement Key for Bauer RV Lock - 952 item #BA85RR. This is the only option we have available to replace a 952 key. The only option to replace the cylinder is the Replacement Cam Lock for RVs…

Without a key number there isn't a way unfortunately. It would be nice if they put the key number on the latch somewhere but they do not do that. You would need to replace the slam latch with part #BA57FR.

It is possible that either the Flexco steps, #SMFP-3100, will fit your trailer. You just have to go by the mounting hole measurements for each. The Flexco steps are also 7 inches on center front to back but 25-3/8 inches left to right.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…