Replacement Monitor Wiring For Rear View Safety Backup Camera System # RVS-770619N  

For your TST TPMS for RVs #TST-507-RV-6-C you'll need the part #TST84FR to replace your factory O-rings.

Yes, the Rear View Safety Universal Mirror Monitor #RVS-619N is the correct replacement for the monitor with your Rear View Safety Universal Backup Camera System #RVS-770619N. I am not 100% sure what you mean by switcher. If you're talking…

Yes, you can use the Rear View Safety Multiplexer Box - 3 Channel, part #RVS-501N, to replace the multiplexer in your Rear View Safety Universal Backup Camera System, part #RVS-770619N. I have included a video demo link below.

I attached a picture of the connector that comes with the Rear View Safety Universal Mirror Monitor #RVS-619N for you to check out. You should be able to compare that to what you have to see if this is the same thing. The display and overall look…

We have the Rear View Safety Universal Mirror Monitor #RVS-619N for the Rear View Safety Universal Backup Camera System #RVS-770619N. This will include the monitor, power cable and remote.

Yes, you can swap out your cap sensors for internal sensors and they will work with your current TST-507-RV-4 system. We offer the internal sensors individually with part #TST-507-INT-S1. Definitely a good idea if you don't want to have to worry…

Hey Robert, The Optronics 12V LED RV Dome Light #UCL60CSWNB is going to be the closest option we currently offer to the L26-0091-NW-REV part number you have. It's 3" in diameter and comes with a touch sensor so that you can easily turn the…

Hey Tennis, thanks for reaching out! To replace the camera on your Rear View Safety Universal Backup Camera System #RVS-770619N you need the Rear View Safety Backup Camera #RVS-771. This has the same viewing angle and specs as the one you're…

Thanks for the picture Karen, Since you have an RVS-770 camera you can replace it with the Rear View Safety Backup Camera #RVS-771. This is going to come with extra wiring that you can hold onto in the event that you have any issues with the wiring…

I checked the owners manual of your 2021 Subaru Crosstrek and it is flat towable as-is which you can confirm if you check out the owners manual as well. You'd need to start with the Blue Ox base plate kit part #BX3622 which is a confirmed fit for…

Hey Steven, If you're seeing power on the wire harness for the monitor but it's still not powering on then you would it's most likely the monitor, especially if you're seeing 12 volts. If you were seeing something lower or no voltage…

Hey Rosemary; I'm happy to verify for you it is compatible. The #FRCBRKT-BL is actually the bracket for the camera but is the Vision S system. But the camera that mounts to that bracket will absolutely work with the Replacement 5" Monitor…