Recommended 2 Inch Hitch Ball for the Curt Channel Mount Forged Pintle and Ball item # C45920  

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I do have an option but the Flash Solid Steel HD Adjustable 2-Ball Mount part #FA49-00-5925 doesn't have an pintle hook/ball adapter. Instead, you can use the Curt Adjustable 2-Ball Channel Mount part #C45926 which has similar specs and can be…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

I have good news, our trailer jack that has a 2 inch outer diameter part #DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity…

Your plan could definitely work but what I would do is weld on a channel, such as #DM59601, and using a coupler such as #DM12688-95 for a 2 inch ball or #DM07678-95 for a 2-5/16 inch ball. And of course, some hardware, #PS024202, to mount the coupler…

The Curt Pintle Hook with 2-5/16" Ball - 2" Hitches - 12,000 lbs/16,000 lbs, #C48006, is an excellent hitch that allows you to pull a trailer with a lunette ring coupler or a trailer with a standard 2-5/16 inch coupler. This hitch fits into…

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

The Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and the Curt #C45908 are identical. According to Blue Ox and Curt they don't make the parts for each other so in theory it is not the exact same part, just the same…